CMS Engineered Products LLC Corrosion Management Systems
CMS Engineered Products LLCCorrosion Management Systems
CVS Controls product line overview brochure
Product line brochure gives an overview of the range of products offered by CVS Controls Ltd. including, but not limited to, control valve assemblies
CVS Controls brochure.pdf
Adobe Acrobat document [3.1 MB]

Please e-mail or phone your repair parts requirements for a quick quotation to: info@cmsengineeredproducts.com  or  (P) 317.292.2914

CONTROL VALVES Globe Valves

Available sizes (Fisher® Series ED & ET): 1”, 1½”, 2”, 2½”, 3”, 4”, 6” and 8”;

Available sizes (Fisher® Series EZ): 1”, 1½” and 2”, 2½”, 3" and 4";

 

These are a single port, globe style body with metal or composition seats and a balanced push-down-to-close valve plug.

There are three styles of valves available:

  • Design (Fisher® Series ED) is intended for general control applications over a wide variety of temperature and pressure drops.
  • Design (Fisher® Series ET) is intended for applications requiring low leakage rates with composition seating (TFE) for tight shutoff requirements or metal-to-metal seating for higher temperature capabilities. The valve plug has a two-piece upper seal.
  • Design (Fisher® Series EZ) valves are globe style with integral end connections, post guiding, and quick-change trim. These valves are used in chemical or hydrocarbon processing applications or in applications that require control of non-lubricating, viscous, or other hard-to-handle fluids.

The flow direction for standard cages is flow down, and the flow direction for the (Fisher* Series EZ) is up through the seat ring, with the following flow characteristics available: linear, quick-opening, and equal percent.

The end connections available are ANSI Class 150, 300 and 600 Raised Face or Ring Type Joint flanges as per ASME B16.34-1996.

Valve bodies are available in LCC, WCB (carbon steel) and 316 stainless steel materials.

CVS Controls manufactures control valves and associated instrumentation products to specification that facilitate the direct replacement with FISHER® process control equipment.

* FISHER® is a registered trademark of Fisher Controls International Inc. Fisher Controls International Inc. is not affiliated with CVS Controls Ltd. in any manner. Fisher Controls International Inc. has not reviewed, sanctioned or endorsed any products manufactured, reconditioned, sold or marketed by CVS Controls Ltd.

Use the search box below to find a specific part # or product name on this site:

(Tip: once on the actual webpage that contains this part # you are searching for, use Ctrl+F (or Command+F) to highlight or go-to that specific part)

site search by freefind advanced

Contact Information

Address:

CMS Engineered Products LLC

235 W 54th Str.

Indianapolis, IN  46208

 

Please e-mail or phone your repair parts requirements

for a quick quotation to:

 

Phone: 

317.292.2914

 

E-Mail:

info@cmsengineeredproducts.com

 

OR  please use our easy Contact Us form

Corrosion resistant PTFE

We specialize in PTFE molded expansion joints / flex connectors - many in stock for immediate shipment; custom fabrication available upon request.

 

Please also review our fully PFA lined ball & butterfly valves, as well as our full line of PTFE lined hose products for your corrosive and/or aggressive fluid transfer application(s).

 

Biopharm, pharmaceutical, industrial-grade products available, many from inventory for immediate shipment.

All major credit cards accepted for immediate purchase
Print Print | Sitemap
© CMS Engineered Products LLC 2018